Intelligent flat roof monitoring with ProGeo® smartex®
Protect your building from moisture and other influences in the long term.
Any flat roof, whether graveled, greened or equipped with solar panels, is potentially susceptible to leaks that often go unnoticed. With the ProGeo® smartex® flat roof management system, your roof is monitored around the clock, so you can carry out repairs immediately before costly or dangerous damage occurs. More than 2,000 satisfied customers already rely on the reliability and efficiency of ProGeo® smartex®.
Direct monitoring
of waterproofing
Waterproofing control systems provide immediate warning of the first loss of seal integrity and do not detect leakage until water has already made its way into the structure.
Information
in real time
The measurement data is automatically sent to the ProGeo® monitoring system every minute. Thanks to the live data and direct waterproofing control, countermeasures can be taken without losing valuable time.
Most precise
locating
After detection, ProGeo® offers a clear representation of the moisture distribution in the roof layer as well as the location of the leakage with an accuracy of 10 cm.
User-friendly
monitoring portal
A real-time alert is sent by SMS or email. At the same time, the monitoring portal can be used to analyze the development over time. In this way, the time of the damage can be determined and the drying out of the area can be observed after the damage has been repaired.
Solutions for
flat roofs
The ProGeo® product portfolio ranges from simple point sensors for cavities to sophisticated waterproofing control systems
smartex® mx
Ideal for flat roofs, green roofs and solar roofs from 250 m²
The smartex® mx system uses sensor technology and electroimpedance-based measurement technology. A sensor matrix with a conductive contact position is installed under the roof waterproofing. A counter electrode on the seal forms an electric field when wet. In the event of a leak, a compensating current flows into the contact layer. The sensor matrix measures these changes in real time and transmits the data to the ProGeo® monitoring portal. In this way, leaks are detected immediately and localized with high precision.
-
Direct monitoring of the waterproofing
-
Real-time capable
-
Full-surface monitoring
-
Exact leak location
-
Physical proof of tightness
-
Immediate leakage detection
ProGeo® measurement and evaluation Unit (PV version)
Precise location of the leak
Counter electrode
Roof waterproofing
Conductive ProGeo® contact layer
smartex® mx sensor matrix
Thermal insulation
Vapor barrier
Building construction
smartex® is
Ideal for small roof areas, balconies and dormers as well as complex roofscapes in architecturally demanding buildings
The smartex® is product range offers optimal protection for smaller areas where an approximate location of the leak is sufficient. The sensor cable is installed with a conductive fleece under the seal. A counter electrode is installed on the seal. A measuring and evaluation unit on the roof or in the building transmits the data to the monitoring portal.
-
Direct monitoring of waterproofing
-
Real-time capable
-
Full-surface monitoring
-
Indicative leak detection
-
Indicative moisture location
ProGeo® measurement and evaluation Unit (PV version)
Counter electrode
Roof waterproofing
Conductive ProGeo® contact layer
smartex® is sensor cable with sensor points
Thermal insulation
Vapor barrier
Building construction
Band sensors
Ideal for raised floors, wet rooms, sloping roofs, roofs with a low risk profile and moisture-sensitive buildings
smartex® dm band sensors can be used flexibly, whether as a single sensor in narrow components or in a parallel arrangement for monitoring large areas. In conjunction with the ProGeo® monitoring portal, smartex® dm enables meaningful trend analyses to assess moisture developments in the component as a result of leaks, accidents or hygrothermal malfunctions.
-
Zone-based monitoring
-
Real-time capable
-
Temporal and spatial trends
-
Optionally also for humidity monitoring
Greening
ProGeo® measuring and transmitting unit (PV version)
Roof waterproofing
Thermal insulation
smartex® dm sensor band
Vapor barrier
Building construction
Point sensors in the roof structure
Ideal for retrofitting flat roofs
The smartex® io point sensor detects moisture in warm roofs and non-visible components in real time. The basis is an innovative sensor head that reaches up to the vapor barrier and continuously converts the humidity state from absolutely dry to completely soaked into an analog signal. Moisture developments and distributions in the component are thus described precisely and comparably. Optionally, the sensors can be expanded with temperature and humidity measurement in the component.
-
Selective moisture measurement
-
Temporal and spatial trends
-
Real-time capable
-
Optionally with temperature and humidity measurement
Gravel
smartex® io point sensor
Roof waterproofing
Thermal insulation
Vapor barrier
Building construction
Manual tightness
testing with smartex® vm
Ideal for leak tests and leak detection of seals without interfering separation layers
Manual measuring unit for scheduled tightness testing
If applicable, ring electrode
Roof waterproofing
Conductive ProGeo® contact layer
Connection set
Thermal insulation
Vapor barrier
Building construction
Web-based
monitoring portal
In the web-based monitoring portal, all system data is aggregated and processed centrally. Here you can find out about the condition of your property at any time and analyze the data comprehensively after an alarm message.
Easy to manage
In the user-friendly online system, you can maintain master data easily, configure notifications individually and control your monitoring data centrally.
Alarm status and action monitoring
Check active alarms and track the dehumidification of your object efficiently and accurately after the repair has been completed.
Data analysis and visualization
Analyze moisture development over time series and precisely identify critical moisture penetration with clear heat maps.
Instant status overview
Keep an eye on the condition of your property – thanks to up-to-date data, you can immediately see if there is a problem with moisture.
Documentation
Document all operations, such as maintenance and other events, around the monitored object.