Waterproofing control systems
Waterproofing control systems provide comprehensive protection by monitoring the condition of the waterproofing in real time. Damage is detected at an early stage as soon as water penetrates the structure. The precise automatic location of leaks enables fast and targeted repairs without time-consuming leak detection.
Direct monitoring
of waterproofing
Waterproofing control systems provide immediate warning of the first loss of seal integrity and do not only detect leakage when water has already made its way into the structure.
Information
in real time
The measurement data is automatically sent to the ProGeo® Monitoring System every minute. Thanks to the live data and the direct seal control, countermeasures can be taken without losing valuable time.
Most precise
locating
After detection, ProGeo offers a clear representation of the moisture distribution in the roof layer, as well as the location of the leakage with an accuracy of 10 cm.
User-friendly
Monitoring Portal
A real-time alert is sent by SMS or email. At the same time, the Monitoring Portal can be used to analyze the development over time. In this way, the time of the damage can be determined and the drying out of the area can be observed after the damage has been repaired.
smartex® mx
Ideal for flat roofs, green roofs and solar roofs from 250 m²
The smartex® mx system uses sensor technology and electroimpedance-based measurement technology. A sensor matrix with a conductive contact position is installed under the roof waterproofing. A counter electrode on the seal forms an electric field when wet. In the event of a leak, a compensating current flows into the contact layer. The sensor matrix measures these changes in real time and transmits the data to the ProGeo® monitoring portal. In this way, leaks are detected immediately and localized with high precision.
-
Exact leak location
-
Full-surface monitoring
-
Real-time capable
-
Immediate leakage detection
-
Direct monitoring of the waterproofing
-
Physical proof of tightness
ProGeo® measurement and evaluation unit (PV version)
Precise location of the leak
Counter electrode
Roof waterproofing
Conductive ProGeo® contact layer
smartex® mx sensor matrix
Thermal insulation
Vapor barrier
Building construction
smartex® is
Ideal for small roof areas, balconies and dormers as well as complex roofscapes in architecturally demanding buildings
The smartex® is product range offers optimal protection for smaller areas where an approximate location of the leak is sufficient. The sensor cable is installed with a conductive fleece under the seal. A counter electrode is installed on the seal. A measuring and evaluation unit on the roof or in the building transmits the data to the monitoring portal.
-
Direct monitoring of waterproofing
-
Real-time capable
-
Full-surface monitoring
-
Indicative leak detection
-
Indicative moisture location
ProGeo® measurement and evaluation unit (PV version)
Counter electrode
Roof waterproofing
Conductive ProGeo® contact layer
smartex® is sensor cable with sensor points
Thermal insulation
Vapor barrier
Building construction
geologger®
For landfills, storage areas and basins for long-term monitoring up to over 100 years
The geologger® product range is specially developed for use in civil engineering and environmental protection and monitors the waterproofing of geotechnical structures. geologger® is approved by the Federal Office for Materials Research and Testing (BAM) for the sealing of landfills and has been reliably protecting our environment for over 30 years. The sensor cables are extremely robust as well as longitudinally waterproof and stretchable with PE layer sheathing that prevents damage caused by structural stress.
-
Direct monitoring of the waterproofing
-
All-surface
-
Exact leak location
-
Real-time capable
-
With BAM and TNO approval
geologger® control cabinet
Reclamation
geologger® counter electrodes
geologger® sensor cable
Surface waterproofing
Waste body
Base waterproofing
Soil
Flexible data transfer
and power supply
Capture – Transfer – Process
In order for data to become valuable information, it must reach its destination quickly and reliably. ProGeo® monitoring systems use state-of-the-art technologies for remote data transmission, whether wired or wireless, for efficient and precise monitoring.
Connection and connection options
The measurement and evaluation units can be connected via a 230 V connection in the building or via a solar module when installed on the roof. Long-term batteries are also available for power supply for individual sensors or small groups of sensors.
Offline monitoring
In exceptional cases, the ProGeo® systems can also be delivered in an offline mode. This has some disadvantages in terms of functionalities, but is necessary for individual system-critical buildings to protect information.
Web-based
Monitoring Portal
In the web-based monitoring portal, all system data is aggregated and processed centrally. Here you can find out about the condition of your property at any time and analyze the data comprehensively after an alarm message.
Easy to manage
In the user-friendly online system, you can maintain master data clearly, configure notifications individually and control your monitoring data centrally.
Alarm status and action monitoring
Check active alarms and track your roof dehumidification efficiently and accurately after repair.
Data analysis and visualization
Analyze moisture development over time series and precisely identify critical moisture penetration with clear heat maps.
Instant status overview
Keep an eye on the condition of your roof – thanks to always up-to-date data, you can immediately see whether your roof is leak-proof.
Documentation
Document all processes around the monitored object.