Special solutions for leakage monitoring in industrial plants from ProGeo®
Advanced leak detection for maximum operational reliability
Industrial equipment is a complex system where seal integrity is critical. ProGeo smartex® monitors pipelines, tunnels, tanks and many other objects where leakage leads to high costs. With ProGeo®, you can reduce breakdowns through predictive maintenance, reduce costs and prevent environmental damage.
24/7
monitoring
ProGeo® checks for leakage in real time
Automatic
alarm
By e‑mail, SMS or via ProGeo® 24/7 support
Locating damage
In the event of a leak, repair work can be carried out in a targeted manner
Prevent costs
Avoid breakdowns and costly repairs
Solutions for
Industrial plants
The ProGeo® product portfolio ranges from simple point sensors for cavities to sophisticated seal control systems
smartex® mx
Ideal for flat roofs, green roofs and solar roofs from 250 m²
The smartex® mx system uses sensor technology and electroimpedance-based measurement technology. A sensor matrix with a conductive contact position is installed under the roof waterproofing. A counter electrode on the seal forms an electric field when wet. In the event of a leak, a compensating current flows into the contact layer. The sensor matrix measures these changes in real time and transmits the data to the ProGeo® monitoring portal. In this way, leaks are detected immediately and localized with high precision.
-
Direct metrological monitoring of the waterproofing
-
Real-time capable
-
Full-Area Monitoring
-
Exact leak location
-
Physical proof of tightness
-
Immediate leakage detection
ProGeo® Measurement and Evaluation Unit (PV Variant)
Precise location of the leak
Counter electrode
Roof waterproofing
conductive ProGeo® contact layer
smartex® ms sensor matrix
Thermal insulation
Vapor barrier
Building construction
smartex® is
Ideal for small roof areas, balconies and dormers as well as complex roofscapes in architecturally demanding buildings
The smartex® is product range offers optimal protection for smaller areas where an approximate location of the leak is sufficient. The sensor cable is installed with a conductive fleece under the seal. A counter electrode is installed on the seal. A measuring and evaluation unit on the roof or in the building transmits the data to the monitoring portal.
-
Direct monitoring of waterproofing
-
Real-time capable
-
Full-Area Monitoring
-
Indicative Leak Detection
-
Indicative moisture location
ProGeo® Measurement and Evaluation Unit (PV Variant)
Counter electrode
Roof waterproofing
conductive ProGeo® contact layer
smartex® is Sensor cable with sensor points
Thermal insulation
Vapor barrier
Building construction
Band Sensors
Ideal for raised floors, wet rooms, sloping roofs, roofs with a low risk profile and moisture-sensitive buildings
smartex® dm strip sensors can be used flexibly, whether as a single sensor in narrow components or in a parallel arrangement for monitoring large areas. In conjunction with the ProGeo® Monitoring Portal, smartex® dm enables meaningful trend analyses to assess moisture developments in the component as a result of leaks, accidents or hygrothermal malfunctions.
-
Area-by-area monitoring
-
Real-time capable
-
Temporal and spatial trends
-
Optionally also for humidity monitoring
Greening
ProGeo® measuring and transmitting unit (solar version)
Roof waterproofing
Thermal insulation
smartex® dm sensor tape
Vapor barrier
Building construction
Point sensors in the roof structure
Ideal for retrofitting flat roofs
The smartex® io point sensor detects moisture in warm roofs and non-visible components in real time. The basis is an innovative sensor head that reaches up to the vapor barrier and continuously converts the humidity state from absolutely dry to completely soaked into an analog signal. Moisture developments and distributions in the component are thus described precisely and comparably. Optionally, the sensors can be expanded with temperature and humidity measurement in the component.
-
Selective moisture measurement
-
Temporal and spatial trends
-
Real-time capable
-
Optionally with temperature and humidity measurement
Gravel
smartex® io point sensor
Roof waterproofing
Thermal insulation
Vapor barrier
Building construction
Sensor mats
Ideal for floor structures of wet rooms, water supply routes, underfloor heating, special industrial applications
smartex® sp sensor mats consist of a two-layer composite sensor that reliably detects moisture over the entire sensor surface. The sensor mats are particularly suitable for applications where moisture escapes over a small area and in small quantities, without conventional point or tape sensors being able to reliably detect it. Such undetected leaks can cause major damage locally, e.g. in timber construction, in facing shells with water-bearing installations, under heating circuit distributors or in supply shafts.
-
Real-time capable
-
All-over
-
Detects even minimal humidity
-
Temporal trends
ProGeo® Measuring and Evaluation Unit
Shower tray
Floor construction
Wooden ceiling
smartex® sp sensor mat
Web-based
Monitoring Portal
In the web-based monitoring portal, all system data is aggregated and processed centrally. Here you can find out about the condition of your property at any time and analyze the data comprehensively after an alarm message.
Easy to manage
In the user-friendly online system, you can maintain master data easily, configure notifications individually and control your monitoring data centrally.
Alarm status and action monitoring
Check active alarms and track the dehumidification of your object efficiently and accurately after the repair has been completed.
Data analysis and visualization
Analyze moisture development over time series and precisely identify critical moisture penetration with clear heat maps.
Instant status overview
Keep an eye on the condition of your property – thanks to up-to-date data, you can immediately see if there is a problem with moisture.
Documentation
Document all operations, such as maintenance and other events, around the monitored object.