Reliable moisture monitoring in timber construction with ProGeo® smartex®
Protect your wooden buildings from moisture damage.
Timber structures are particularly susceptible to moisture damage, which can compromise structural integrity and lead to premature renovation cases. With the ProGeo® smartex® systems for timber buildings, we offer an advanced solution for comprehensive monitoring, from the basement to the roof, and thus protect your valuable timber structures.
Roof
ProGeo® checks the moisture and waterproofing of your timber construction in real time.
Construction
Water can accumulate in facades, ceilings, and cavities. ProGeo® protects your structure from damage with point and strip sensors.
Wet room
Under wet rooms such as bathrooms and toilets, errors in construction can quickly lead to water in the construction. Humidity sensors from ProGeo® detect these faults at an early stage.
Basement
The sensitive wooden constructions in the basement have to be protected from moisture for decades. A leakage would result in immense costs. It can be avoided by smartex® systems from ProGeo®.
Solutions for
timber construction
The ProGeo® product portfolio ranges from simple point sensors for cavities to sophisticated seal control systems
Smartex® MX
Ideal for flat roofs, green roofs and solar roofs from 250 m²
The smartex® mx system uses sensor technology and electroimpedance-based measurement technology. A sensor matrix with a conductive contact position is installed under the roof waterproofing. A counter electrode on the seal forms an electric field when wet. In the event of a leak, a compensating current flows into the contact layer. The sensor matrix measures these changes in real time and transmits the data to the ProGeo® monitoring portal. In this way, leaks are detected immediately and localized with high precision.
-
Direct metrological monitoring of the waterproofing
-
Real-time capable
-
Full-Area Monitoring
-
Exact leak location
-
Physical proof of tightness
-
Immediate leakage detection
ProGeo® Measurement and Evaluation Unit (PV Variant)
Precise location of the leak
Counter electrode
Roof waterproofing
conductive ProGeo® contact layer
smartex® ms sensor matrix
Thermal insulation
Vapor barrier
Building construction
smartex® is
Ideal for small roof areas, balconies and dormers as well as complex roofscapes in architecturally demanding buildings
The smartex® is product range offers optimal protection for smaller areas where an approximate location of the leak is sufficient. The sensor cable is installed with a conductive fleece under the seal. A counter electrode is installed on the seal. A measuring and evaluation unit on the roof or in the building transmits the data to the monitoring portal.
-
Direct monitoring of waterproofing
-
Real-time capable
-
Full-Area Monitoring
-
Indicative Leak Detection
-
Indicative moisture location
ProGeo® Measurement and Evaluation Unit (PV Variant)
Counter electrode
Roof waterproofing
conductive ProGeo® contact layer
smartex® is Sensor cable with sensor points
Thermal insulation
Vapor barrier
Building construction
Band Sensors
Ideal for raised floors, wet rooms, sloping roofs, roofs with a low risk profile and moisture-sensitive buildings
smartex® dm strip sensors can be used flexibly, whether as a single sensor in narrow components or in a parallel arrangement for monitoring large areas. In conjunction with the ProGeo® Monitoring Portal, smartex® dm enables meaningful trend analyses to assess moisture developments in the component as a result of leaks, accidents or hygrothermal malfunctions.
-
Area-by-area monitoring
-
Real-time capable
-
Temporal and spatial trends
-
Optionally also for humidity monitoring
Greening
ProGeo® measuring and transmitting unit (solar version)
Roof waterproofing
Thermal insulation
smartex® dm sensor tape
Vapor barrier
Building construction
Point sensors in the roof structure
Ideal for retrofitting flat roofs
The smartex® io point sensor detects moisture in warm roofs and non-visible components in real time. The basis is an innovative sensor head that reaches up to the vapor barrier and continuously converts the humidity state from absolutely dry to completely soaked into an analog signal. Moisture developments and distributions in the component are thus described precisely and comparably. Optionally, the sensors can be expanded with temperature and humidity measurement in the component.
-
Selective moisture measurement
-
Temporal and spatial trends
-
Real-time capable
-
Optionally with temperature and humidity measurement
Gravel
smartex® io point sensor
Roof waterproofing
Thermal insulation
Vapor barrier
Building construction
Sensor mats
Ideal for floor structures of wet rooms, water supply routes, underfloor heating, special industrial applications
smartex® sp sensor mats consist of a two-layer composite sensor that reliably detects moisture over the entire sensor surface. The sensor mats are particularly suitable for applications where moisture escapes over a small area and in small quantities, without conventional point or tape sensors being able to reliably detect it. Such undetected leaks can cause major damage locally, e.g. in timber construction, in facing shells with water-bearing installations, under heating circuit distributors or in supply shafts.
-
Real-time capable
-
All-over
-
Detects even minimal humidity
-
Temporal trends
ProGeo® Measuring and Evaluation Unit
Shower tray
Floor construction
Wooden ceiling
smartex® sp sensor mat
All ProGeo® advantages
at a glance
24/7 Monitoring
ProGeo® checks moisture and waterproofing of your wet rooms in real time
Automatic
alarm
By e‑mail, SMS or via ProGeo® 24/7 support
Locating damage
Detection of the leak in the ProGeo® monitoring portal with an accuracy of 10 cm
Prevent costs
Avoid substantial damage to your structure
Web-based
Monitoring Portal
In the web-based monitoring portal, all system data is aggregated and processed centrally. Here you can find out about the condition of your property at any time and analyze the data comprehensively after an alarm message.
Easy to manage
In the user-friendly online system, you can maintain master data easily, configure notifications individually and control your monitoring data centrally.
Alarm status and action monitoring
Check active alarms and track your roof dehumidification efficiently and accurately after repair.
Data analysis and visualization
Analyze moisture development over time series and precisely identify critical moisture penetration with clear heat maps.
Instant status overview
Keep an eye on the condition of your roof – thanks to always up-to-date data, you can immediately see whether your roof is leak-proof.
Documentation
Document all processes around the monitored object.